Installation Instructions for2006-2007 Chevrolet CorvetteLingenfelter High Flow Air Intake SystemWith LPE Power Programmer(6.0L LS2 V8 engine)PN: L650
Parts List # Part number Description 1 LN4230-AB LPE C6 Corvette airbox and bracket assembly 1 LN4230-AI LPE C6 air-bridge 1 L660070105 LP
Read the entire instruction manual before beginning installation. Some stock parts will be used in reassembly.Page 2 of 7• Work entire assembly free
Page 3 of 7The following steps need to be performed from underneath the vehicle:• Remove the three 7 mm screws holding the front fascia inside the ra
Page 4 of 7Install top radiator shroud ensuring it engages fan shroud in the center as shown.Tuck water hose back into holders on shroud, secure with
Page 5 of 7Install the 3.9” straight hose on the other side of the MAF sensor.Slide a 90-110 mm clamp over the straight hose section and position the
Page 6 of 7Thoroughly clean edge of airbox with supplied alcohol pad.Cut the supplied foam seal to t airbox as shown in image. Install rubber seal to
L650080105 PP C6 Corvette Air Intake Instructions v3.02.indd1557 Winchester RoadDecatur, Indiana 46733 260 724 2552 phone260 724 8761 faxwww.lingenfel
Comments to this Manuals